Prati nas na društvenim mrežama!
ZATVORI
Prati nas na društvenim mrežama!
U nastavku možete pronaći odgovore na najčešća pitanja vezane uz dostavu, uključujući podatke o našim logističkim partnerima koji osiguravaju brzu i sigurnu isporuku vaših narudžbi.
Dostavu vršimo u suradnji s provjerenim i pouzdanim logističkim partnerima, kako bismo osigurali brzu i sigurnu isporuku Vaše narudžbe.
Na našem webu a tako i u našim poslovnicama prihvaćamo različite načine plaćanja.
U ponudi imamo uz gotovinsko i virmansko plaćanje, mogućnost plaćanja svim poznatim debitnim kreditnim karticama u Hrvatskoj, a također i brojne kombinacije obročne otplate.
Postoje mogućnosti kreditiranja i leasinga u suradnji s financijskim ustanovama o čemu više možete saznati upitom kod naših prodavača.
Plaćanje kod preuzimanja robe na adresi dostave
Jednokratno
Reklamacije se priznaju samo uz predočeni račun i jamstveni list kao jedini dokaz kupnje. Slipovi kartica i slične potvrde ne mogu zamijeniti račun.
Bez računa nema reklamacija.
U slučaju reklamacije proizvoda zbog nedostataka ili skrivenih mana, proizvod pošaljite na adresu reklamacijskog odjela i servisnog centra: HGSPOT Grupe d.o.o., Ulica kneza Branimira 24, 10040 Zagreb ili nas kontaktirajte na broj telefona: 01/6611-511.
Sve prigovore sukladno članku 10. Zakona o zaštiti potrošača (N.N. 41./2014.), možete poslati putem pošte, telefaksa ili elektroničke pošte kao i u poslovnim prostorijama /trgovinama u kojima se nalazite. Ukoliko se prigovor podnosi u poslovnim prostorijama/trgovinama, trgovac je dužan odmah pisanim putem ovjeriti njegov primitak.
Ostali načini podnošenja prigovora:
ili podnijeti u poslovnim prostorijama na adresi Zagreb, Ulica kneza Branimira 24.
Kako bi Vam sukladno članku 10. stavak 5. Zakona potvrdili primitak pisanog prigovora, a zatim i na isti odgovorili, molimo Vas da navedete točne podatke za primitak istog.
Odgovor na Vaš prigovor zakonski moramo dati u pisanom obliku najkasnije u roku 15 dana od dana primitka prigovora.
Šifra proizvoda: 203760
Informacije o proizvodu
Obračun rata
Jamstvo: 24 mjeseca
Rezervacijom osiguravate da Vas proizvod čeka u odabranoj poslovnici do kraja radnog vremena poslovnice s mogućnošću plaćanja na licu mjesta svim dostupnim načinima plaćanja.
If you're looking for a small form factor case for powerful PC hardware, then it's worth having a look at the Lian Li DAN Cases A3-mATX. With approximately 26 litres of capacity, this micro-ATX case is compact and takes up little space on your desk. Nonetheless, this mini-tower fulfils the cooling requirements of high-end PC hardware.
The Lian Li DAN Cases A3-mATX can accommodate up to ten 120mm fans. These are distributed as follows: three at the top, three at the side, three at the bottom, and one at the rear. Alternatively, two 140mm fans can be mounted to the top and side. With 25mm thick fans at the bottom, the GPU thickness will bel imited to 61mm. For CPU air coolers, there is 165mm clearance.
Lian Li and Daniel Hansen have also considered liquid cooling support in the development of the A3-mATX: A radiator can be mounted at three locations in the case. On the top or side, there is room for a maximum of one 360mm (triple) radiator or 280mm (dual) radiator. An additional 240mm radiator (dual) can be installed at the bottom. With the fans mounted below the radiator, even a 360mm radiator (triple) can be installed.
The Lian Li DAN Cases A3-mATX is suitable for a Micro-ATX or Mini-ITX form factor motherboard. Unlike a Mini-ITX case, this PC case has 4 expansion slots and facilitates a 4-slot high and up to 430mm long graphics card.
Two 2.5-inch SSDs can be installed on a bracket with four mounting positions to choose from. At the bottom of the case, you can mount an additional 3.5-inch HDD or another 2.5-inch drive. For the power supply unit, you have the choice between ATX, SFX-L, and SFX. The PSU can be mounted to the front or the side to create more space for the graphics card or radiator - depending on your preferences. In general, the smaller your power supply, the more space is available for additional hardware.
The front I/O panel of the Lian Li DAN Cases A3-mATX has two USB 3.0 Type-A ports, one USB 3.1 Type-C port, two 3.5mm audio jacks (Mic-In/Audio-Out), and a power button.
If you're looking for a small form factor case for powerful PC hardware, then it's worth having a look at the Lian Li DAN Cases A3-mATX. With approximately 26 litres of capacity, this micro-ATX case is compact and takes up little space on your desk. Nonetheless, this mini-tower fulfils the cooling requirements of high-end PC hardware.
The Lian Li DAN Cases A3-mATX can accommodate up to ten 120mm fans. These are distributed as follows: three at the top, three at the side, three at the bottom, and one at the rear. Alternatively, two 140mm fans can be mounted to the top and side. With 25mm thick fans at the bottom, the GPU thickness will bel imited to 61mm. For CPU air coolers, there is 165mm clearance.
Lian Li and Daniel Hansen have also considered liquid cooling support in the development of the A3-mATX: A radiator can be mounted at three locations in the case. On the top or side, there is room for a maximum of one 360mm (triple) radiator or 280mm (dual) radiator. An additional 240mm radiator (dual) can be installed at the bottom. With the fans mounted below the radiator, even a 360mm radiator (triple) can be installed.
The Lian Li DAN Cases A3-mATX is suitable for a Micro-ATX or Mini-ITX form factor motherboard. Unlike a Mini-ITX case, this PC case has 4 expansion slots and facilitates a 4-slot high and up to 430mm long graphics card.
Two 2.5-inch SSDs can be installed on a bracket with four mounting positions to choose from. At the bottom of the case, you can mount an additional 3.5-inch HDD or another 2.5-inch drive. For the power supply unit, you have the choice between ATX, SFX-L, and SFX. The PSU can be mounted to the front or the side to create more space for the graphics card or radiator - depending on your preferences. In general, the smaller your power supply, the more space is available for additional hardware.
The front I/O panel of the Lian Li DAN Cases A3-mATX has two USB 3.0 Type-A ports, one USB 3.1 Type-C port, two 3.5mm audio jacks (Mic-In/Audio-Out), and a power button.
