Prati nas na društvenim mrežama!
ZATVORI
Prati nas na društvenim mrežama!
Uz veliki broj usluga u ponudi imamo i uslugu dostave narudžbe na Vaš kućni prag. U nastavku provjerite najčešće upite i informacije vezane uz usluge dostave, te informacije o našim partnerima putem kojih vršimo uslugu dostave Vaših narudžbi.
Na našem webu a tako i u našim poslovnicama prihvaćamo različite načine plaćanja.
U ponudi imamo uz gotovinsko i virmansko plaćanje, mogućnost plaćanja svim poznatim debitnim kreditnim karticama u Hrvatskoj, a također i brojne kombinacije obročne otplate.
Postoje mogućnosti kreditiranja i leasinga u suradnji s financijskim ustanovama o čemu više možete saznati upitom kod naših prodavača.
Plaćanje kod preuzimanja robe na adresi dostave
Jednokratno
Reklamacije se priznaju samo uz predočeni račun i jamstveni list kao jedini dokaz kupnje. Slipovi kartica i slične potvrde ne mogu zamijeniti račun.
Bez računa nema reklamacija.
U slučaju reklamacije proizvoda zbog nedostataka ili skrivenih mana, proizvod pošaljite na adresu reklamacijskog odjela i servisnog centra: HGSPOT Grupe d.o.o., Ulica kneza Branimira 24, 10040 Zagreb ili nas kontaktirajte na broj telefona: 01/6611-511.
Sve prigovore sukladno članku 10. Zakona o zaštiti potrošača (N.N. 41./2014.), možete poslati putem pošte, telefaksa ili elektroničke pošte kao i u poslovnim prostorijama /trgovinama u kojima se nalazite. Ukoliko se prigovor podnosi u poslovnim prostorijama/trgovinama, trgovac je dužan odmah pisanim putem ovjeriti njegov primitak.
Ostali načini podnošenja prigovora:
ili podnijeti u poslovnim prostorijama na adresi Zagreb, Ulica kneza Branimira 24.
Kako bi Vam sukladno članku 10. stavak 5. Zakona potvrdili primitak pisanog prigovora, a zatim i na isti odgovorili, molimo Vas da navedete točne podatke za primitak istog.
Odgovor na Vaš prigovor zakonski moramo dati u pisanom obliku najkasnije u roku 15 dana od dana primitka prigovora.
Šifra proizvoda: 201047
Informacije o proizvodu
Obračun rata
Jamstvo: 72 mjeseca
P12 Max
120 mm High-Speed PWM Fan
General Specifications
Dimensions: 120 (L) x 120 (W) x 25 (H) mm
Net Weight: 184 g
Operating Ambient Temperature: 0–40 °C
Fan Specifications
Fan Speed: 400–3300 rpm (PWM controlled), 0 rpm below 2 % PWM
Airflow: 81.04cfm | 137.69m3/h
Static Pressure: 4.35 mmH2O
Noise Level: 0.6 Sone
Fan Bearing: Fluid Dynamic Bearing
Typical Voltage: 12 V DC
Start Up Voltage: 3.9V DC
Current: 0.29 A
Cable Length: 400 mm
Connector: 4-Pin PWM Connector
Virtually Silent due Fluid Dynamic Bearing
As a special feature, the P12 Max is equipped with ARCTIC's proven Hydrodynamic Bearing. This enables the virtually silent operation at low speeds that customers have been asking for. At maximum speed, brute performance is still guaranteed. Although theese bearings tend to wear out, ARCTIC does not compromise on durability.
Extremely Wide Speed Range
The P12 Max features the controllable speed of an impressively wide range from 400 rpm up to 3300 rpm. This enables a quiet operation when low airflow is needed and also an unprecedented level of performance on heatsinks and radiators. The P12 Max provides a significant performance boost to existing air and water cooling solutions.
Maximum Performance - Without Compromises
The P12 Max delivers focused airflow and high static pressure, making it suitable for all scenarios. The fan is optimised for use on radiators, heat sinks, pinholes and mesh. Therefore, the P12 Max is the ideal fan for enthusiasts and professionals who are looking for maximum performance with a long service life.
0dB Mode - Zero RPM
The fan speed can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Thus, the P12 Max allows an incomparably dynamic adjustment of the speed, so that the airflow can be perfectly regulated for every case.
Improved Stability
The P12 Max features a closed fan wheel design. The advantage of this fan wheel combination is a pressure stability without compromise. In scenarios with high pressure resistances and higher speeds, the force effect is distributed uniformly over the entire fan wheel and enables low-vibration rotation while maintaining high static pressure.
Maximum Smoothness, Minimum Vibration
Due to a sinus-magnetizing, the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. The rubber pads mounted at the corners additionally dampen the residual vibrations caused by the higher revolutions.
